A plywood factory that decided to finish the job.
TerraLam Plywood Industries manufactures pre-laminated plywood at its own unit at New Focal Point, Amritsar. Everything from veneer treatment to the final laminate press happens under one roof.
Design hours were being lost to pasting mica.
Every interior project we saw had the same bottleneck. The plywood arrived, then the laminate arrived separately, then a carpenter spent days pasting sheet after sheet by hand. Bubbles, uneven bonding and adhesive stains were accepted as normal. Uncalibrated boards made doors that did not sit flush.
We built TerraLam to remove that whole step. The laminate is pressed on the plywood in our factory, under controlled heat and pressure, with a balancing laminate on the back so the board stays flat. What reaches the site is a finished panel.
From raw timber to finished panel, in four stages.
Raw material
Selected imported hardwood timber for the core and gurjan face veneer. Full composed sheet veneers in every layer, so there are no gaps or overlaps inside the board.
Treatment
Four-stage preservative treatment on veneer, resin, adhesive and surface. Vacuum pressure treatment on all veneers, 12.5 kg/m³ retention.
Pressing
Plies bonded with BWP-grade high-solid phenolic polymer and pressed together with the decorative and balancing laminates in a single operation.
Calibration
Both sides calibrated to exact thickness. Edge straightness and squareness held to 0.20%. Each sheet checked before dispatch.
Architects, interior designers, contractors and dealers across Punjab.
Most of our sheets go into modular kitchens, wardrobes, wall panelling and office interiors. Designers specify TerraLam when the finish matters and the deadline is fixed. Contractors come back because the boards are flat and the sheets cut clean.
We supply direct from the factory and through dealers. Samples of any finish are available from the factory.
Production in our own factory. No job work.
Formaldehyde emission compliance.
BWP Marine Grade specification.
Finishes in the current catalogue.
Need a sample or a price list?
Send us the finish codes and thickness. We reply the same working day.