Ten things every TerraLam sheet is.
These are not tiers or options. Every sheet that leaves the factory, MR or BWP, 9 mm or 18 mm, carries all ten.
retardantPLYWOOD
waterproofPLYWOOD
gaplessPLYWOOD
warrantyPLYWOOD
resinsPLYWOOD
nail holdingPLYWOOD
borer proofPLYWOOD
pressure treatedPLYWOOD
core & panelsPLYWOOD
calibratedPLYWOOD
Fire retardant
Treated to slow flame spread, for kitchens and commercial interiors.
Boiling waterproof
Passes the 72-hour boiling water test. Glue line stays intact.
100% gapless
Full composed sheet veneers in every layer. No core gaps, no overlaps, no hollow spots under a screw.
Lifetime warranty
On every product, not a select range.
100% phenolic resins
BWP-grade high-solid phenolic polymer in every board, including MR grade.
High screw & nail holding
Screw holding above 265 kg, nail holding above 155 kg.
Termite & borer proof
Four-stage treatment of veneer, resin, glue and surface. 4X TER-BO Kill.
Vacuum pressure treated
All veneers, not just the face. 12.5 kg/m³ preservative retention.
Fully composed core & panels
Robust, well-structured board from face to face.
Fully calibrated
Uniform thickness across the sheet, both sides. Doors sit flush, edges line up.
The four problems pre-lamination removes.
Extended timelines
Carpenters spend days pasting paper or mica one piece at a time. Delivery waits on them.
Labour dependency
Skilled labour cost goes into surface pasting instead of core assembly and finishing.
Quality inconsistency
Manual pasting means air bubbles, uneven bonding and adhesive stains on premium interiors.
Site mess and waste
Dust, adhesive fumes and trimming wastage on every job.
Built the same way, every time.
Raw material
Carefully selected imported hardwood timber; high quality gurjan face veneer; all composed full-sheet veneers in all layers.
Weather durability
Longer conditioning of raw material and pressed material keeps the moisture balance right, preventing warping and delamination.
E0 emission
Scavengers in the resin give zero emission of free formaldehyde.
Advanced machinery
Cutting-edge presses and calibrators, 100% in-house manufacturing.
Perfect finish
A bubble-free, industrial-grade surface that manual work cannot replicate.
50% faster
Project execution time cut in half by skipping the lamination phase entirely.
30% savings
No separate laminate purchase and no pasting labour.
Need a sample or a price list?
Send us the finish codes and thickness. We reply the same working day.