The next generation of plywood, laminated at the factory.
TerraLam sheets arrive with the laminate already pressed on, balanced on both sides and calibrated to exact thickness. No pasting at site, no bubbles, no waiting for glue to dry. Cut, fit and hand over.
retardantPLYWOOD
waterproofPLYWOOD
gaplessPLYWOOD
warrantyPLYWOOD
resinsPLYWOOD
nail holdingPLYWOOD
borer proofPLYWOOD
pressure treatedPLYWOOD
core & panelsPLYWOOD
calibratedPLYWOOD
- Air bubbles under the sheet
- Visible joints and glue marks
- Edges lift over time
- Pressed under heat, zero bubbles
- One continuous surface
- Balanced both sides, stays flat
The same laminate. Two very different results.
Hand pasting depends on the carpenter, the adhesive, the weather and the day. Factory pressing does not. Every TerraLam sheet is laminated under the same heat and pressure, with a balancing laminate on the back, so the board leaves flat and stays flat.
It also removes the slowest step on an interior job. Carpenters go straight from cutting to assembly.
One sheet for the whole interior.
MR grade for dry rooms, BWP Marine grade wherever there is water. Both in every finish.
One sheet. Seven layers. Pressed together under heat and pressure.
Hardwood core plies, gurjan face veneer, BWP phenolic resin and the decorative laminate are pressed in a single factory operation, then calibrated on both sides. The result is a balanced board that does not warp, with a finish that cannot bubble or peel because it was never pasted.
Every sheet, tested.
Pick the grade by where it goes.
Three steps from finish to delivery.
Pick finishes
Shortlist codes on the catalogue page, or ask for the sample kit.
Grade & thickness
MR or BWP, in 9, 12 or 18 mm. Tell us the quantity.
Dispatch
From the factory at New Focal Point to your site or workshop.
Samples of any finish, a price list for your project, or a visit to the plant — one call.